design recommendations

Width: as wide as possible, as the width determines the number of active users. (1.20 m wide = one route for a trio of students = 1 climber and 2 spotters). Ideally 15 simultaneous courses, 18 m wide.

Height: 7 m minimum

Configuration: use an inclined surface and an overhang of 1.20 m to 2.00 m, use an incline board for beginners and favour vertical surfaces.

All routes must be visible simultaneously to the supervisor.

Number of 3D holds: 6 / m2 to 9 / m2 for 2 to 3 climbing routes in overlapping colours, including test routes for the BAC (difficulty level from 3c to 7a).

Support: can be attached to any support: concrete, cinder block, glued laminated timber, metal frame or free standing

Landing surface: interior = removable landing mat / exterior = rolled gravel 10/15 calibre, 30 cm to 40 cm deep.

Clearance zone: 3 m above the height of the largest overhang.

Safety: Draw a line (red, for example) at a height of 3 m to indicate the height not to be exceeded without rope (traverse work). In case of a multisport area, use a separation curtain or net.

Other equipment / comfort: minimum lighting intensity = 300 lux, uniform / heating and ventilation temperature: 14°C (hot air must not accumulate at the top of the climbing wall).

our services on request:

  • design assistance
  • free advice / quote without obligation
  • assistance in the drafting of specifications
  • engineering & technical information (support resistance, standards information, etc.)

Our field experts are at your disposal for any quote.

 

pyramide tips 

Use a curtain, preferably opaque, to separate the climbing wall from other sports areas.

Consider the climbing equipment needed for the activity.

Plan out routes using coloured holds, from beginner-level to experienced, respecting the rule of 2/3 – 1/3 (2/3 of the routes for beginners / experienced climbers of level 3 to 5a and 1/3 of the routes for expert levels of 5b to 7a.)

  • yellow for beginner routes – level 3 (inclined surface)
  • grey for beginner routes – level 4a (inclined or vertical surface)
  • red for beginner routes – level 4b (vertical surface)
  • pink for beginner routes – level 4c (vertical surface)
  • green for intermediate routes – level 5a (vertical surface)
  • orange for intermediate routes – level 5b (inclined surface)
  • blue for advanced routes – level 5c (inclined surface)
  • purple for advanced routes – level 6a (inclined surface)
  • black for expert routes – level 6b / 6c and 7a (inclined surface)

Use track numbering and signage to indicate the level of difficulty by hold colour.